2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2_5HP_In_Above_Ground_Swimming_Pool_Sand_Filter_Pump_Motor_Strainer_basket_110V_01_mty
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V

2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V
Hayward 2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer US. Powerful Self-Priming IP55 2.5HP Electric Motor. Suitable for pools up to 100,000 litres. Advanced S-Tek Flow System For Increased Efficiency With Continuous Flow Rate Of 560L/min. Full Size Removable Strainer Basket. 100% Salt and Chlorine compatible. Full Commercial Duty – Designed to run 24/7. Works with In ground and Above Ground. Built-In Thermal Overload Protection. Ideal for Residential/Commercial Swimming Pools & Spa’s. Voltage:110V / 60Hz. Head:Max 18m / 59ft. Inlet:1.5” Internal. Outlet:1.5” Internal. Pipe Compatibility:Fit 1.5 inch plumbing internally. Weight: 11 kg /24 lbs. Power cord length:1.5m/59inch. Locate the pump as close as possible to the pool. The pump suction line should not be smaller than the pressure line. All piping must be airtight. The threads on the pump must be sealed with Teflon Tape or Silicon, when the pump unions are screwed on. The weight of the piping should be supported independently and not carried by the pump. Fill the pump tank with water before starting. High suction lifts, or long suction lines, require additional time and reduce the performance of the pump. The water being pumped cools and lubricates the seal. After the pump tank has been filled with water, and the motot started, allow a few moments for the pump to start delivering water. 1x 59inch Power cord w/US plug. (No service on Weekend and public holidays). All return products should be in brand new state with all accessories included. This item is in the category “Home & Garden\Yard, Garden & Outdoor Living\Pools & Spas\Pool Equipment & Parts\Pool Pumps”. The seller is “greenenv” and is located in this country: US. This item can be shipped to United States.
  • Water Type: All Water Types
  • Model: SPP1800A
  • Max. Temperature: 140 ℉/60 ℃
  • Energy Star: A+++
  • External Thread diameter: G2.25\
  • IPX5 CAP: 60μF/250V AC
  • Item Height: 13.4 in
  • Internal Thread diameter: NPT 1.5\
  • Capacitor: 25 F
  • Item Width: 6.7 in
  • Material: ABS, Copper, CPVC, Stainless Steel
  • Maximum Head Lift: 18M/59FT
  • Power Source: Electric, Corded
  • Type: Standard Pool Pump
  • Installation: Universal Installation
  • Features: Chlorine Resistant, Easy Assembly, Easy Installation, Noise Vibration Reduction, Rust Resistant, Single-Speed, Submersible
  • Item Length: 25.6 in
  • Minimum Pump Power Requirement: 2 1/2 hp
  • Item Weight: 24 lb
  • Power: 1850 W
  • Set Includes: Pool pump, 2 pc Npt connectors, Full Instructions
  • Brand: iMeshbean
  • Manufacturer Warranty: Lifetime
  • Amperage: 16A
  • Recommended Flow Rate: 520L/min
  • Suitable For: Above Ground Pools, Inflatable & Kid Pools, In Ground Pools
  • Maximum Flow Rate: 560 L/m
  • Labels & Certifications: UL for motor, CE-Approved
  • Power cord length: 1.5m/59in
  • Phase: Single
  • Pump Housing Material: PPGF30 + PC (anti-Oxident)
  • Plug: US Plug
  • UPC: 607353821681
  • RPM: 3450r/min
  • Voltage: 110-120V

2.5HP In/Above Ground Swimming Pool Sand Filter Pump Motor Strainer basket 110V

About